Are you looking for some easy-to-follow methods on how to refill Vuse Alto pods?
Don’t leave and you are in the right place. This step-by-step guide will help you enjoy vaping continuously.
I summarized 6 steps to refill Alto pod below for your reference:
- Use pliers to pull the metal cap out of the pod
- Pull the plastic piece out from the pod
- Use tweezers to take out the gasket in the pod
- Drop e-liquid into the pod until halfway in
- Put the gasket onto the cap before reinstalling
- Insert the cap into the pod
Let’s go ahead to the detailed guide below.
Introduction
You may be experiencing such difficulties: It’s hard to open the Vuse pod let alone refilling the pod.
To get a satisfying and uninterrupted vaping, our team from VapePenZone NZ tried to make it smoother for users to open and refill pods.
We had an experiment that opened and refilled 5 pods successfully.
I’ve summarized the tips and steps from this experiment, including the tools used, and I hope this guide will help you greatly.
Tools For Refilling Vuse Alto Pods
As the saying goes, a good tool is necessary for a good job. Good tools can help us speed up the refilling process.
Below are the tools we use and suggest when refilling your pods.
- A pair of pliers
- Tweezers or paper clips
- E-liquid juice
- A pair of gloves
- Tissue paper
By the way, gloves are not necessary if you are confident that you will avoid injury when refilling.
How To Refill Vuse Alto Pods Easily？
Watching the video above will help with Vuse cartridge refilling, or if you prefer, I can guide you through the process step by step below.
#1 Use pliers to pull the metal cap out of the pod
First of all, you need to use the pliers. If permitted, wear your gloves best.
Put tissue paper on your table to hold the spilled e-liquid drops.
Grasps the pod with one hand, and the other grasps the pliers, then clips the pod’s metal cap.
Twisting and pulling it with your strength together will be helpful.
#2 Pull the plastic piece out from the pod
Then, you will find here’s a plastic piece in the pod. Now, use pliers to pull it out from the pod.
If you are lucky, in step one, can pull the metal cap with the plastic piece together.
#3 Use tweezers to take out the gasket in the pod
Now, there’s a last piece in the pod — the gasket. You can use tweezers to clip it and pull it out.
Please be careful to get the left e-liquid on your hands when pulling it out.
#4 Drop e-liquid into the pod until halfway in
At this time, there’s nothing in your pod. It’s time to drop e-liquid into it.
Target your e-liquid bottom dropper to the empty pod.
Please note that you need to drip from the side, not from the centre, then gently squeeze and you will see the e-liquid coming out of the bottle.
Until the pod is refilled halfway up, stop adding it.
#5 Put the gasket onto the cap before reinstalling
You can assemble now and put the gasket onto the plastic side of the cap to get a snug fit. The cap will be ready for the next step.
#6 Insert the cap into the pod
Then, you need to insert the cap into the pod gently.
Press them and double-check that they combine stabilization to avoid leakage.
You’ve done it now and grasp some tips about how to refill Vuse Alto pods.
What Can You Refill Vuse Pods With?
Can you refill Vuse pods with any juice? That’s a frequent question hanging on most vapers’ heads. The answer is No. Not every juice can be added to Vuse vapes.
Because Vuse pods are prefilled, they are designed for an optimal balance between coil resistance, wick material, and e-liquid viscosity.
Different e-liquids with different VG/PG ratios and nicotine levels. E-liquids with a higher PG ratio will tend to be more flavoursome, while a higher VG ratio will produce more vapour.
Due to their generally thicker nature, e-liquids with a higher VG can create a greater build-up of residue around device coils and may lead to having to increase cleaning of your device.
So, it’s good to choose the same ratio of e-liquid as the Vuse pod you used.
How To Make Vuse Pods Last Longer？
If you want to prolong the life of pods, some correct maintenance tips are needed. Let’s check them below.
✅Remove the pod when charging
It’s a good habit to remove the pod when charging. This will help you avoid producing external chemicals and accelerated vaporization of the e-liquid due to the charging Vuse.
✅Avoid chain drawing
Chian vaping or instant drawing will lead to overheating and shorten the life span of pods.
So, it’s better to have 4 – 6 seconds between each inhaling, which can leave time for your vape to cool and the coil to saturation.
✅Choose the compatible e-liquids for the Vuse
The compatible e-liquid is a perfect couple to Vuse vape NZ. If you use different e-liquids with high VG, that will lead to poor wicks and coil burnout early.
What’s The Vuse Refillable Pods Price?
The price comparison of Vuse pods according to the Top 5 NZ vape stores on Google is below.
| Online Vape Shop | Vuse Pods(2 PCS) | Pods Bundle |
|---|---|---|
| Vuse.co.nz | $13.99 | null |
| Cosmic | $13.99 | null |
| Podlyfe | $11 | $79 (6 packs,12 pods) |
| Urbanvape | $13 | null |
| Vapeys.co.nz | $13.99 | null |
As you can see, the main price of a package of Vuse pods is around $13, and the lowest price is $11.
If you are seeking Vuse pod prices, I hope this price table will help you make a good choice.
Verdict
This detailed guide on how to refill Vuse Alto pods provides you with six simple steps and some tips and ways to prolong the life of your vape.
If you get any issues during the refilling process, please feel free to leave a message to let us know. Our team will be happy here to support you.
FAQ
How To Refill Vuse ePod 2?
Vuse ePod 2 with pre-filled pods rather than refillable ones. The pods are disposable, and Vuse does not recommend refilling them.
However, you can remove the metal cap and rubber gasket, drop in your chosen e-liquid, and refill the Vuse pod.
How To Refill Vuse Go 5000?
The Vuse Go 5000 is a rechargeable, disposable vape that can be disposed of after e-liquid consumption.
How do you refill a vape pod cartridge?
Open the fill port on the pod, then drop it with e-liquids. After that, you need to close the port to avoid e-liquid leakage. Wait a few seconds, and you can start vaping.
How do you remove the cap from an Alto pod?
Clamp and pull the metal cap out of the pod with pliers, then use tweezers to carefully pull out the gasket from the pod.
How do you make an Alto pod hit again?
To repressurize the pod, remove the vape cartridge from the battery and locate the hole on the bottom.
Cover the hole with your finger, hold the pod upright, and briefly blow into it. After a few subsequent hits, your pod will regain its normal flavour.
What kind of juice is in Vuse Alto pods?
Vuse e-liquids consist of nearly identical compositions, comprising five key ingredients: vegetable glycerin (VG), propylene glycol (PG), flavourings, nicotine, and water.
