How To Reset Vuse ePod 2 | Master 5 Steps In 2 Minutes

Have you ever met malfunctions with your Vuse ePod 2? Such as reduced vapour production and a tighter draw.

This guide from VapePenZone NZ will help you learn how to reset Vuse ePod 2 here. Trust me, it’s easy and will guide you step by step to reset your vape device quickly.

5 steps to reset ePod 2 are below for your reference:

1. Turn off the ePod 2 device
2. Remove the pod from the device
3. Clean the connection between the device and the pod
4. Reinsert the pod firmly into the device
5. Activate your ePod 2

Simply scroll down to follow the step-by-step guide, allowing it to assist you in resetting your ePod 2 and enjoying the best pod vape.

Introduction

This guide to resetting your ePod 2 will benefit you whether you’re facing technical issues or just want to know how to do so.

In order to allow more vapers to avoid the hassle of vaping interruptions through a simple reset.

Our team from VapePenZone NZ has reset 5 ePods 2 to revive them successfully for continued vaping.

So we record and conclude 5 detailed steps as follows to revive your device.

Follow along as we walk you through the process and no technical expertise is required.

It only takes 2 minutes to get your ePod2 back to optimal performance.

How To Reset Vuse ePod 2 Easily?

Performing a reset on your ePOD 2 can often resolve various issues. Please make sure your device is charged before resetting it. Otherwise, it still won’t work.

#1 Turn off the ePod 2 device

If your device is activated now, the first step is to turn off your vape.

You need to avoid any further activation attempts and allow the device to remain inactive for at least 5 seconds.

This waiting period is crucial as it allows any residual electrical charge within the device to dissipate fully. Ensure that the device is completely deactivated.

#2 Remove the pod from the device

Once you’ve confirmed that the vape device is fully deactivated, the next step is to remove the ePod from the device.

Using your hands, gently grasp the pod and pull it away from the device.

Vuse ePods are designed with a magnetic power connection, making it easy to detach them from the device without the need for excessive force or tools.

The magnetic connection ensures a secure attachment while still allowing for easy removal when needed.

Take care to grip the pod firmly but gently to avoid damaging it during removal.

#3 Clean the connection between the device and the pod

After removing the pod from the Vuse 2.0, inspect the device and pod for dust, dirt, or residual e-liquid.

Remove dust and dirt from the device and pod surfaces by gently running a paper towel or rag in circular motions.

Pay close attention to areas where dust may accumulate, such as connections and pod surfaces.

If necessary, slightly dampen the rag with water or use a wet wipe to help remove stubborn residue.

However, to prevent damage, avoid soaking the rag or allowing moisture to enter the device.

Place the cleaned parts in a well-ventilated area and let them air dry for a few seconds or minutes, depending on the humidity at the time of cleaning.

They must be allowed to dry thoroughly before they can be reassembled and used.

#4 Reinsert the pod firmly into the device

Once the ePod 2 and the pod have been cleaned and dried, it is time to reassemble the components.

Begin by aligning the bottom of the pod with the opening on the Vuse 2.0 device.

Take care to ensure that the pod is inserted in the correct orientation so that the contacts on the bottom of the pod face the connection points on the device.

As you gently push the pod into place, you will feel the magnetic attraction between the pod and the device.

Continue to apply light pressure until you hear or feel a distinct click, indicating that the magnetic connection between the pod and the device is firmly engaged.

After successfully inserting the pod into the device, you will notice a white light emitting from the device.

This white light indicates that the pod is properly connected and recognised by the device.

#5 Activate your ePod 2

To activate your vape device, gently inhale air through the mouthpiece and observe the device’s response.

Note the sound of the heating element activating or the airflow through the device.

Also, note if the LED lights up white.

On exhalation, look for visible vapour coming out of the mouthpiece and whether a white light comes on during inhalation and gradually goes out with the exhalation.

When Should To Reset Vuse ePod 2?

Once you’ve mastered the 5 steps to resetting your vape, the next question arises: when is the ideal time to reset your device? Let’s explore this question below:

🔋Enough power but less vapour

Despite having sufficient power, experiencing less vapour production could be attributed to the accumulation of e-liquid residue or debris in the airflow channels of your device.

Over time, these residues or debris may build up, leading to blockages in the airflow channels.

This impedes the smooth passage of air and diminishes the efficiency of vapour production.

Therefore, it’s essential to reset and clean your device when it has less vapour.

📌Replace a new pod

When you want to change your flavour or run out of e-liquid in your pod, it’s time to reset the vape, put in a new pod, activate and vape again.

💡LED light blinking

If the indicator light blinks continuously, it’s time to reset your device to check if there’s a wrong connection.

Sometimes, poor vapour production can be caused by loose connections between the battery and the heating element.

Overall, resetting your ePod2 is a simple troubleshooting step that can help address various issues that may be affecting vapour production.

However, if resetting the device doesn’t solve the problem, you may need to investigate further or seek assistance from the manufacturer or a knowledgeable vaping professional.

How To Unlock Vuse ePod 2?

Have you also encountered the device auto shutdown, don’t worry, this is Vuse Vape NZ‘s auto shutdown protection mis-touch design.

If the device is not used for more than 5 seconds, ePod2 will automatically shut down. Here are 3 steps to unlock it:

1. Make sure your device is charged.
2. Insert a pod into the device, and you will see a white light.
3. Simply take the first puff and unlock it.

When drawing, you will notice the white light coming on and then fading out.

If you find that the device is not working, this may mean that your ePOD2 battery has run out of charge, you need to place it on charge.

How To Fix A Vuse ePod 2 Short Circuit?

If you notice that the LED light is flashing white when using the Vuse 2.0 but there is no vapour, this could be caused by a short circuit.

In this discussion, 6 Tips will help you to fix an ePod2 Circuit below.

The key points of removing the cartridge, checking the battery, using the charging source, cleaning the connection, and replacing the cartridge when needed will be addressed.

1. Remove the pod

To fix an ePod 2 short circuit issue, remove the Pod from the device carefully first.

2. Check if the pod is damaged

Once removed, inspect for cracks or other physical damage that could cause a short circuit.

If there is any visible damage on the pod, it must be replaced with a new ePod in good condition.

3. Check if the corrosion is on the device’s connection

In the case of vapes, metal parts, including connectors and contacts, can corrode due to exposure to moisture or other corrosive substances in the environment.

If there are signs of corrosion or rust spots, this could indicate poor contact, which could lead to undercharging or short-circuiting.

Therefore, vape connections must be regularly checked for corrosion and cleaned.

4. Clean connection

Cleaning the connection between the charger and the ePod2 device is crucial for a successful start-up, as even a small amount of dust can reduce current flow by up to 80%.

Maintaining a clean connection is vital for optimizing the device’s performance.

5. Reinsert the pod to the device

When replacing the container, make sure that it snaps securely into place and that all connections are properly connected.

6. Activate your device

Now, you can activate your vape device by drawing on it. Simply take a puff, and the device should activate, allowing you to inhale the vapour.

With these steps, you can solve the problem of short-circuiting the device.

If it still does not work properly, please contact the manufacturer or after-sales service for technical support.

Why Is Vuse ePod 2 Not Working Vibrating?

Generally speaking, it is rare to encounter an ePOD2 that does not work or vibrates.

This is most likely due to damage to the internal structure of the device.

You can try to reset the device to resume use, if it still does not work, then it is recommended that you get a new device.

Also, if the ePod 2 Plus does not work and vibrations, it is due to the automatic shutdown.

After a long period of time without vaping to activate the device, it will automatically switch off, and the vibration will remind you to unlock it before you can use it again.

Why Is My Vuse Not Hitting But Lighting Up?

You may find that the ePod2 does not hit but lights up, and as far as we know from our use, one reason is an improper or loose connection between the device and the pod.

If the LED lights up but no vapour is being generated, try resetting removing your pod and cleaning the inside of the slot.

Eliminating any remaining e-liquid or dirt can resolve the issue.

For detailed instructions on how to reset the Vuse 2.0, please refer to the details provided above.

Another reason is due to the low battery level.

If the battery is low or drained, there may not be enough power to heat the coils and create vapour.

You can try to charge the device with the original charger and see if that solves the problem.

Why Is Vuse ePod 2 Flashing Light?

The common reasons for Vuse 2.0 flashing lights may be a successful connection, low battery or short circuits of the device.

So how should you distinguish between the meaning of signals? Please refer to the following table of why the ePOD 2 is flashing light.

Phenomenon	Possible Cause
Vuse ePod 2 flashing white light	– Connection recognized (during charging or pod insertion)
Vuse ePod 2 flashing light 3 times	– Short circuit – Puffing on the vape pen for more than five seconds
Vuse ePod 2 flashing light 10 times	– Low battery level

Anyway, when you notice the ePod 2 flashing white lights, reset or charge it to bring it back to normal.

How To Maintain Vuse ePod 2 Properly？

Maintaining your ePod 2 properly is crucial for ensuring optimal performance and longevity of the device. Here are detailed tips on how to maintain your ePOD2.

✅Regularly clean

Keep your equipment clean by wiping it down with a dry cloth.

Depending on how clean your equipment needs to be, consider using a damp paper towel (antibacterial wipes) to remove built-up dirt or residue if it needs a deep clean.

✅Use an Orignal Vuse charger

Always use the charger that came with your ePod 2 vape.

Using a compatible Vuse charger ensures safe and efficient charging and minimises the risk of damage to your device’s battery.

✅Keep your device dry

Keep your ePod 2 vape pen, charging accessories and VUSE Pod dry.

Otherwise, the moisture will damage your device, leading to malfunctions or failures.

✅Avoid Overcharging

The LED light will turn off when the ePod2 is fully charged, please unplug the charger immediately to prevent overcharging.

Never charge the device overnight, as prolonged charging will reduce the battery life and may pose a safety risk.

Once the device is fully charged, unplug it from the charger to prevent overcharging.

✅Store properly

Store your vape pen in a dry and temperate environment, ideally between 0–25°C.

Verdict

If you are having technical issues with your ePod 2, I hope this reset guide will help you to continue using your Vuse Epod 2 vape.

If your vape still doesn’t work, we hope the VapePenZone vape shop‘s promotion will give you a new vaping experience.

Lastly, feel free to leave a comment and let me know if you experience any other vape issues.

FAQ About How To Reset Vuse ePod 2